When it comes to the monitoring of industrial wastewater, in the last lesson we learned about the problems that may be encountered during the work process. In this lesson, water quality online monitor manufacturers are going to learn what problems with you? Still related to industrial wastewater monitoring, mainly learn some measures that need to be taken in the process of industrial monitoring work!
Improve the Setting of Treatment Facilities, Do a Good Job in the Setting of Emission Nodes!
Combined with the characteristics and key points of industrial wastewater discharge, the structural properties of wastewater and the setting standards for later analysis are reasonably sorted out. At the same time, the necessary water quality monitoring instrument and auxiliary equipment should be tested on-site, and matched with the fixed test content to test the effect after matching. In addition, the relevant departments should synchronously set sample inspection points for wastewater discharge outlets, pay attention to the reasonable setting of discharge nodes, and avoid the indirect cooling water discharge of wastewater with high pollution concentration in some enterprises in the process of water quality monitoring in a timely manner.
Planning Wastewater Monitoring Period to do a Good Job of Supervision!
Industrial wastewater monitoring work needs to be implemented according to relevant standards, comprehensive consideration of factors affecting water quality monitoring work, and actively take corresponding measures to solve relevant problems. It is also necessary to do a good job of supervision and control work, improve the wastewater monitoring management system, and scientifically standardize the wastewater monitoring process, ensure the rationality and scientific nature of all aspects of wastewater monitoring, and achieve relevant work according to technical inspection and sampling setting standards.
The Quality Requirements of On-site Staff.
It is necessary to select reasonable on-site monitoring personnel according to the requirements of internal technical control and wastewater monitoring work, do a good job in identifying the comprehensive quality of on-site monitoring personnel, and improve the computer operation ability of monitoring personnel in order to improve the quality of comprehensive data. Secondly, do a good job of scientific verification and assessment analysis, ensure the effective use of monitoring data and information, improve the fairness and persuasion of certification results, to strictly manage the on-site monitoring personnel, and constantly improve the quality of theoretical research work on wastewater monitoring.
Improve the Application of Monitoring Data.
In order to achieve the counterpart and symptomatic data, the monitoring department must improve the monitoring report, highlight the directivity of the data through analysis, analyze and develop the data in combination with the working mode of the environmental management department and the industry characteristics of the pollutant discharge unit, and provide the environmental management department with accurate key information such as wastewater discharge status and wastewater facility operation status. There is also the environmental management department to strengthen the coordination of the work of the department and the surface water monitoring department, should form a cooperation, so that the monitoring department efficient use of the surface water monitoring system, fully understand the change law of environmental quality conditions, so as to have a focus, by the targeted development of environmental policies, strengthen pollution control efficiency. In addition, the monitoring department and the environmental management department should also reach a consensus to continuously optimize the monitoring facilities, improve the advanced nature of the facilities and the degree of compliance with the demand, it is recommended to use the equipment configuration reference standard in the “National Environmental Monitoring Equipment Management Regulations” as a mandatory requirement for environmental supervision, and optimize the equipment laboratory and certification work to better serve the environmental management.
