Chlorides in water refer to chlorinated salts, but table salt is only one of the main chlorides. The content of chloride in natural water is usually affected by regional distribution, with higher in coastal areas and relatively low in mountainous areas. But if it’s in a water source, the level of chloride in the water doesn’t change much.

We should know that the change of chloride content in water is one of the factors to judge whether the water is polluted, the higher the chloride in water will make the water salty, but also affect the secretion of the liquid, which is not conducive to digestion, in addition, it also has a corrosive effect on the equipment! So what are the main sources of these chlorides? The following water quality online monitor manufacturers to understand the main sources of chloride in water with you.

1.When underground water flows through rocks or mineral deposits with high levels of chloride, it enters the water and increases the amount of sulfide in the water. However, the vulcanization here is relatively stable and does not change much.

2.When drinking water is contaminated with chlorides in urine, feces, industrial wastewater, etc., the chloride content will also increase. The characteristic of attention is that the stable level is suddenly increased or suddenly decreased, similar to waves, which is an important indicator to judge drinking water pollution. (The content of chloride in water can be detected by T8000-Cl chloride online analyzer)

3.Major water sources in some coastal areas, such as rivers and lakes. It is affected by the tide and sea breeze, and the chloride content of the water increases. However, users should pay attention to the chlorination as a pollution indicator, we must pay attention to the area, to understand the content of chloride in the water under normal circumstances, so that we can determine whether the water quality is polluted. In addition, under different seasons and different climate conditions, the chloride content of the same water source will have obvious changes. For example, in the summer, there is a lot of precipitation, which will have a strong dilution effect on surface water, water intake and other water sources. Chloride levels rise this season.

In fact, chloride in water is only one of the important indicators, to the safe use of water quality, different industries and different places of monitoring indicators are different, but more than one chloride is so simple. It can be seen that it is necessary to install different water quality monitors in various industries to ensure the safety of water quality!